ошибка PCM + Check Engine

[DC]

Сообщение от San4es

Слишком много всего вылезает. Это после стирания кодов и одной поездки?
Мотор атмо или турбо?

мотор турбо

с ошибками я не понимаю логики, что-то стирается сканером, что-то остается
сканер самый простой.. поэтому и задал вопрос про piwis с соседней ветке

а вот коды ошибок, которые вылетали при другой поездке:

Car Scanner ELM OBD2

DTC report



Selected brand: Porsche

============1==============

P0306



Raw code: 0306

Status: Confirmed



OBDII: Cylinder 6 - misfire detected

============2==============

P0304



Raw code: 0304

Status: Confirmed



OBDII: Cylinder 4 - misfire detected

============3==============

P0305



Raw code: 0305

Status: Confirmed



OBDII: Cylinder 5 - misfire detected

============4==============

P0300



Raw code: 0300

Status: Confirmed



OBDII: Random/multiple cylinder(s) - misfire detected

============5==============

P0306



Raw code: 0306

Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle



OBDII: Cylinder 6 - misfire detected

============6==============

P0304



Raw code: 0304

Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle



OBDII: Cylinder 4 - misfire detected

============7==============

P0305



Raw code: 0305

Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle



OBDII: Cylinder 5 - misfire detected

============8==============

P0300



Raw code: 0300

Status: Pending fault present, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle



OBDII: Random/multiple cylinder(s) - misfire detected

============9==============

P2800



Raw code: 2800

Status: Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory



OBDII: Transmission range (TR) sensor B - PRNDL input

============10==============

B198C



Raw code: 998C

Status: Pending fault present, Test conditions are met, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request

============11==============

P1D03



Raw code: 1D03

Status: Pending fault present, Pending fault present during this driving cycle

============12==============

P0001



Raw code: 0001

Status: Test is inhibited by other DTC, Validated and stored in non volatile memory



OBDII: Fuel volume regulator control - open circuit

============13==============

P0038



Raw code: 0038

Status: Pending fault present, Test is inhibited by other DTC, Test has not been completed, Validated fault has been present during this drive cycle



OBDII: Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit high

============14==============

B0C7D



Raw code: 8C7D

Status: Pending fault present, Test conditions are met, Test is inhibited by other DTC, Test has not been completed

============15==============

P0303



Raw code: 0303

Status: Pending fault present during this driving cycle, Test conditions are met



OBDII: Cylinder 3 - misfire detected

============16==============

P0128



Raw code: 0128

OBDII: Coolant thermostat - coolant temperature below thermostat regulating temperature

============17==============

P389B



Raw code: 389B

Status: Pending fault present, Pending fault present during this driving cycle, Test has not been completed

============18==============

P0306



Raw code: 0306

Status: Pending



OBDII: Cylinder 6 - misfire detected

============19==============

P0304



Raw code: 0304

Status: Pending



OBDII: Cylinder 4 - misfire detected

============20==============

P0305



Raw code: 0305

Status: Pending



OBDII: Cylinder 5 - misfire detected

============21==============

P0300



Raw code: 0300

Status: Pending



OBDII: Random/multiple cylinder(s) - misfire detected

============22==============

P0306



Raw code: 0306

Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request



OBDII: Cylinder 6 - misfire detected

============23==============

P0304



Raw code: 0304

Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request



OBDII: Cylinder 4 - misfire detected

============24==============

P0305



Raw code: 0305

Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request



OBDII: Cylinder 5 - misfire detected

============25==============

P0300



Raw code: 0300

Status: Pending fault present, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request



OBDII: Random/multiple cylinder(s) - misfire detected

============26==============

P2800



Raw code: 2800

Status: Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory



OBDII: Transmission range (TR) sensor B - PRNDL input

============27==============

B1B13



Raw code: 9B13

Status: Pending fault present, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request

============28==============

P1C05



Raw code: 1C05

Status: Pending fault present, Pending fault present during this driving cycle

============29==============

P0001



Raw code: 0001

Status: Test is inhibited by other DTC, Validated and stored in non volatile memory



OBDII: Fuel volume regulator control - open circuit

============30==============

P0038



Raw code: 0038

Status: Pending fault present, Pending fault present during this driving cycle, Test is inhibited by other DTC, Test has not been completed, Validated fault has been present during this drive cycle



OBDII: Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit high

============31==============

P1379



Raw code: 1379

Status: Test conditions are met, Test is inhibited by other DTC, Test has not been completed

============32==============

P0503



Raw code: 0503

Status: Pending fault present during this driving cycle, Test conditions are met



OBDII: Vehicle speed sensor (VSS) - intermittent/erratic/high input

============33==============

P0128



Raw code: 0128

OBDII: Coolant thermostat - coolant temperature below thermostat regulating temperature

============34==============

P389E



Raw code: 389E

Status: Pending fault present, Pending fault present during this driving cycle, Test conditions are met, Test has not been completed